Gizga E1-431 OEM Laptop Keyboard

Removing Keyboard Guides: Turn off the computer, then disconnect the AC adapter and all cables from the computer. Wait, till the inside of the computer cools, before you start the following procedures. Close the computer display and turn the computer over. Remove the battery. Remove the screws that secure the palm rest and the screw that secures the keyboard. Turn the computer over and open the display. Push at the sides of the palm rest so it bends upwards in the middle a little and lift it away from the computer a little. Push the sides of the palm rest. Move the palm rest carefully away from the computer until you can see where it's connected and then detach the connector. Hold the keyboard above the computer, and then detach the connector. Now the keyboard has been removed. Installing Keyboard Guides: To reinstall the keyboard do as follow. Push the palm rest down and towards the keyboard until it clicks into place. Close the computer display, and turn the computer over. Reinstall screws for the palm rest, and the screw for the keyboard. Reinstall the battery. Turn the computer over again. Connect the AC adapter and cables to the computer then turn it on. Please check the compatible devices list below. There is a possibility that your model number may not be listed in the compatible list but it may still fit your model.